| 机械密封件类术语说明（意义）及分类 |
| 添加时间：2017/11/14 17:15:55 浏览次数： |
| 机械密封件类术语说明（意义）及分类？ Terminology, significance and classification of mechanical seals 今天由小编告诉您机械密封件的术语相关的话题，主要简单的讲一下关于机械密封件的术语正确的英语翻译以及术语的意义（说明），让大家更进一步好好认识什么是机械密封件术语。 Today, let's tell you a little bit about the terminology of mechanical seals, and we'll give you a brief description of the term "mechanical seals" and the meaning of the terms, so that you can get a better understanding of what mechanical seals are. [机械密封件类术语说明（意义）及分类？] [terminology of mechanical seals (meaning) and classification ] [机械密封件类术语说明（意义）及分类？] [terminology of mechanical seals (meaning) and classification ] 1．机械密封件（端面密封件） 1. mechanical seals (end face seals) 密封术语英文：Mehanical seal（face seal） Sealing terminology in English: Mehanical seal (face seal) 密封术语说明：由至少一对垂直旋转轴线的端面在流体压力和补偿机构弹力（或磁力）的作用之下以及辅助密封件的配合下保持贴合并相对滑动而构成的防止流体泄漏的装置，称之为机械密封件或端面密封件了。 Description: sealing terms by at least one end of the vertical axis of rotation of the fluid pressure and the elasticity of compensation organizations (or force) with the role of auxiliary seal and keep the relative sliding postmerger and constitutes a device to prevent fluid leakage, called the mechanical seal or seal. 2．液体动压式机械密封件 2. liquid dynamic mechanical seals 密封术语英文：hydrodynamic mechanical seal Sealing terminology English: hydrodynamic mechanical seal 密封术语说明：密封端面设计成特殊的几何形状，利用相对旋转自行产生流体动压效应的机械密封件。 Sealing term: sealing end face is designed into special geometry and mechanical seals are produced by relative rotation to produce hydrodynamic effect. 3．切向作用流体动压式机械密封件 3. tangential action fluid dynamic mechanical seal 密封术语英文：tangential acting hydrodynamic mechanical seal Sealing terminology English: tangential acting hydrodynamic mechanical seal 密封术语说明：能在切向形成流体动压分布的流体动压式机械密封件。 Sealing terminology: a hydrodynamic mechanical seal capable of forming fluid dynamic distribution in tangential direction. 4．径向作用流体动压式机械密封件（主动作用流体动压式机械密封件） 4. radial acting fluid dynamic mechanical seals (active acting fluid pressure mechanical seals) 密封术语英文：radial acting hydrodynamic mechanical seal（positive acting hydrodynamic mechanical seal） Sealing terminology English: radial acting hydrodynamic mechanical seal (positive acting hydrodynamic mechanical seal) 密封术语说明：能在径向形成其有抵抗泄漏作用的流体动压力分布的流体动压式机械密封件。 Sealing term: a hydrodynamic pressure mechanical seal that can form a hydrodynamic pressure distribution in the radial direction against leakage. 5．流体静压式机械密封件 5. hydrostatic mechanical seals 密封术语英文：hydrostatic mechanical seal Sealing terminology English: hydrostatic mechanical seal 密封术语说明：密封端面设计成特殊的几何形状，利用外部引入的压力流体或被密封介质本身通过密封界面的压力降产生流体静压效应的机械密封件。 Sealing terminology: the sealing end is designed into a special geometry, using externally introduced pressure fluid or sealed by the medium itself through the sealing interface pressure drop to produce hydrostatic effect of mechanical seals. 6．外加压液体静压式机械密封件 6. hydrostatic pressure mechanical seals with external pressure 密封术语英文：outside pressurized hydrostatic mechanical seal Sealing terminology English: outside pressurized hydrostatic mechanical seal 密封术语说明：从外部引入加压流体的流体静压式机械密封件。 Sealing terminology: hydrostatic mechanical seals for introducing pressurized fluids from outside. 7．自加压流体静压式机械密封件 7. self pressurized hydrostatic mechanical seal 密封术语英文：self－pressurized hydrostatic mechanical seal Hydrostatic mechanical: Selfpressurized English sealing terms seal 密封术语说明：以被密封介质本身为加压流体的流体静压式机械密封件。 Sealing terminology: a hydrostatic mechanical seal with pressurized fluid as the sealing medium itself. 8．非接触式机械密封件（受控模式机械密封件） 8. non contact mechanical seals (controlled mode mechanical seals) 密封术语英文：non－contacting mechanical seal （control film mechanical seal） Mechanical seal: Noncontacting English sealing terms (control film mechanical seal) 密封术语说明：流体动压式机械密封件和液体静压式机械密封件的总称。 Sealing terminology: fluid dynamic mechanical seals and hydrostatic mechanical seals collectively. 9．内装式机械密封件 9. internal mechanical seals 密封术语英文：internally mounted mechanical seal Sealing terminology English: internally mounted mechanical seal 密封术语说明：静止密封环装于密封端盖（或相当于密封端盖的零件）内侧（即面向主机工作腔的一侧）的机械密封件。 Sealing term: the mechanical seal of the stationary seal ring installed on the inner side of the sealing end cover (or the part of the sealing end cover) (i.e., the side facing the main working chamber). 10．外装式机械密封件 10. externally mounted mechanical seals 密封术语英文：externally moanted mechaniceal seal Sealing terminology English: externally moanted mechaniceal seal 密封术语说明：静止密封环装于端盖外侧的机械密封件。一般说来，对于这类型密封件可以直接监视其端面的磨损情况。 Sealing term: mechanical seal of the stationary seal ring mounted on the outer side of the end cover. In general, the wear of the end face can be directly monitored for this type of seal. 11．弹簧内置式机械密封件 11. spring built-in mechanical seals 密封术语英文：mechanical seal with inside mounted spring Sealing terminology English: mechanical seal with inside mounted spring 密封术语说明：弹簧置于密封件流体之内的机械密封件 Sealing terms: mechanical seals for springs placed in sealing fluid 12．弹簧外置式机械密封件 12. spring external mechanical seal 密封术语英文：mechanical seal with outside mounted spring Sealing terminology English: mechanical seal with outside mounted spring 密封术语说明：弹簧置于密封流体之外的机械密封件 Sealing terminology: mechanical seals for springs outside the sealing fluid 13．背面高压式机械密封件 13. back high pressure mechanical seal 密封术语英文：mechanical seal with hing back pressure Sealing terminology English: mechanical seal with Hing back pressure 密封术语说明：补偿密封环上离密封件端面最远的背面处于高压侧的机械密封件 Sealing term: the mechanical seal that compensates the sealing ring farthest from the end face of the seal and is on the high pressure side 14．背面低压式机械密封件 14. back low pressure mechanical seal 密封术语英文：mechanical seal with lwo back pressure Sealing terminology English: mechanical seal with lwo back pressure 密封术语说明：补偿密封环上离密封端面最远的背面处于低压侧的机械密封件 Sealing term: the mechanical seal that compensates the sealing ring farthest from the sealing face and is on the low pressure side 15．内流式机械密封件 15. internal flow mechanical seals 密封术语英文：mechanical seal with inward leakage Sealing terminology English: mechanical seal with inward leakage 密封术语说明：密封流体在密封端面间的泄漏方向与离心力方向相反的机械密封件。 Sealing term: mechanical seal that is opposite to the centrifugal force in the direction of the leakage of the sealing fluid between the ends of the seal. 16．外流式机械密封件 16. external flow mechanical seals 密封术语英文：mechanical seal with outward leakage Sealing terminology English: mechanical seal with outward leakage 密封术语说明：密封流体在密封端面间的泄漏方向与离心力方向相同的机械密封件。 Sealing term: mechanical seal with the same direction of centrifugal force as the direction of leakage between the sealing fluid and the end face of the seal. 17．弹簧旋转式机械密封件 17. spring rotating mechanical seals 密封术语英文：spring rotating machancial seal Sealing terminology English: spring rotating machancial seal 密封术语说明：弹性密封元件随轴旋转的机械密封件。 Sealing terminology: mechanical seals for flexible seals with shaft rotation. 18．弹簧静止式机械密封件 18. spring static mechanical seals 密封术语英文：spring standing machanical seal Sealing terminology English: Spring standing machanical seal 密封术语说明：弹性密封元件不承受轴旋转的机械密封件。 Sealing terminology: mechanical seals with elastomeric seals that do not bear shaft rotation. 19．单弹簧式机械密封件 19. single spring mechanical seals 密封术语英文：single－spring mechanical seal Mechanical seal: Singlespring English sealing terms 密封术语说明：补偿机构中只包含有一个弹簧的机械密封件。 Sealing term: a mechanical seal that contains only one spring in the compensating mechanism. 20．多弹簧式机械密封件 20. multi spring mechanical seals 密封术语英文：multiple－spring mechanical seal Mechanical seal: Multiplespring English sealing terms 密封术语说明：补偿机构中包含有多个弹簧机械密封件。 Sealing terminology: the compensation mechanism includes a plurality of spring mechanical seals. 21．非平衡式机械密封件 21. non balanced mechanical seals 密封术语英文：unbalanced mechanical seal Sealing terminology English: unbalanced mechanical seal 密封术语说明：载荷系数K＜1的机械密封件。 Sealing terminology: mechanical seals with load coefficient K < 1. |
| 上一页 机械密封件知识集萃，拆、装、选、用一文全懂 |
| 下一页 没有了 |
Copyright © 技术支持：遨游网络