| 机械密封件安装注意事项 |
| 添加时间：2020/11/16 16:24:27 浏览次数： |
| 机械密封件安装注意事项： Mechanical seal installation precautions: 1、设备转轴的径向跳动应≤0.04毫米，轴向窜动量不允许大于0.1毫米； 1. The radial runout of the rotating shaft of the equipment shall be ≤ 0.04mm, and the axial displacement shall not be greater than 0.1mm; 2、设备的密封部位在安装时应保持清洁，密封零件应进行清洗，密封端面完好无损，防止杂质和灰尘带入密封部位； 2. The sealing parts of the equipment shall be kept clean during installation, and the sealing parts shall be cleaned. The sealing end face shall be intact to prevent impurities and dust from being brought into the sealing parts; 3、在安装过程中严禁碰击、敲打，以免使机械密封摩擦付破损而密封失效； 3. In the installation process, it is strictly prohibited to hit and knock, so as to avoid the mechanical seal friction pair damage and seal failure; 4、安装时在与密封相接触的表面应涂一层清洁的机械油，以便能顺利安装； 4. During installation, a layer of clean machine oil should be applied on the surface contacting with the seal to facilitate the smooth installation; 5、安装静环压盖时，拧紧螺丝必须受力均匀，保证静环端面与轴心线的垂直要求； 5. When installing the static ring gland, the tightening screw must be stressed evenly to ensure the vertical requirement between the end face of the static ring and the axis line; 6、安装后用手推动动环，能使动环在轴上灵活移动，并有一定弹性； 6. After installation, push the moving ring by hand, which can make the moving ring move flexibly on the shaft and have certain elasticity; 7、安装后用手盘动转轴、转轴应无轻重感觉； 7. After installation, rotate the shaft by hand, and the shaft should be light and light; 8、设备在运转前必须充满介质，以防止干摩擦而使密封失效。 8. The equipment must be filled with medium before operation to prevent seal failure due to dry friction. 为了确保整个机械密封件的安装质量，小编建议你最好还是寻找专业的安装师傅进行机械密封件的安装吧，确保相关机械在后续使用过程中的稳定性能。 In order to ensure the installation quality of the whole mechanical seal, Xiaobian suggests that you'd better find a professional installation master to install the mechanical seal, so as to ensure the stable performance of the relevant machinery in the subsequent use process. |
| 上一页 机械密封件属于精密、结构较为复杂的机械基础元件之一 |
| 下一页 机械密封件应注意问题 |
Copyright © 技术支持：遨游网络